A Featured cisco rack Article

Headlines on cisco rack

Update on updates

Wed, 12 Mar 2008 20:17:54 +0000
You may have noticed a distinct lack of updating on this site recently. I have been continuing with

Congratulations to BlindHog.net for earning the highest community votes (second to IPexpert's blog). Recognizing the popularity of this site, Blind Hog is now the featured blog!

How to enable media cut through for H323 clients in CCM?

Thu, 03 Aug 2006 01:03:15 +0000
Set the Service Parameter, H225 Device Connect Timer to either 0 or 1.
Default is 0 and media cut through is enabled. To disable set it to 2.

Pingback from Top CCIE’s « #sh ip route vrf CCIE

PPP Virtual template and Frame-relay

Wed, 30 Aug 2006 06:31:41 +0000
To configure a virtual template for MLP LFI on a frame-relay subinterface, you have to remove the DLCI configured under that subinterface first before reapplying it back with the ppp keyword.
int s0/0
no frame-relay interface-dlci 30
 frame-relay interface-dlci 30 ppp virtual-template 1
Apply any LLQ, IP settings, ppp configs under the virtual template interface.
...]

Tutorial: Achieving full reachability to eBGP learned routes from multiple AS’ from within your IGP with NO redistribution of BGP–>IGP

Thu, 13 Nov 2008 03:56:38 +0000
I have learned a LOT in the last 3 nights (mostly sleepless nights hehe) through this exercise, and really wanted to share it with the world. Maybe through this somebody out there will learn something as well, or perhaps avoid some of the pitfalls I encountered along the way.
Let’s begin with the basic scenario: ...]

CCNP Training Books

Mon, 25 Aug 2008 00:26:39 +0000
CCNP® (Cisco Certified Network Professional) certification indicates advanced knowledge of networks. It is the second stage of the Network Installation and Support track, and it teaches the installation, configuration, and operation of LAN, WAN, and dial access services for medium-to-large networks with multiple protocols. The content emphasizes topics such as security, converged networks, quality of ...]

CIR calculation

Sun, 09 Jul 2006 23:43:07 +0000
WHen calculating cir and mincir for FRTS, use 95 % of the CIR value. If CIR = 256k, it should be used as 256000. Do not multiply 256 with 1024.

cisco rack Products we recommend



Experience the Enterprise Rent-A-Car value


bsci
bsci
build ccie lab
pass the ccie lab | real ccie lab | real ccie labs