A synopsis on cisco 642 891

This composition on cisco 642 891 was written with the purest intention of spreading information cisco 642 891. Let it retain its purity.
#




ccdp
ccie
ccie 350 001
ccie assessor lab
ccie lab study guide | ccie lab test | ccie lab tips

Learn all about ccda

News about ccda

Failed my second lab attempt and what comes next?

Sat, 17 May 2008 11:50:58 +0000
I have a child and i really enjoy it to be with him. Configuring devices is still quite nice, but it will not be as good as playing with my son. So he learns the most in his first year.
How to motivate for the next try? Learning from the last attempts is quite difficult for ...]

A Curious NAT Scenario

Tue, 15 Jul 2008 08:47:54 +0000
Look at the following NAT scenario (thanks to Huan Pham on Groupstudy for the example). R2 is configured to translate R1 Loopback0 IP address to one of it’s own Loopback0 IP addresses:

R2:
ip nat inside source static 150.1.1.1 150.1.2.100
!
interface Serial 0/1
ip nat inside
!
inerface FastEthernet 0/0
ip nat outside

All hosts behind Ethernet segment can reach R1 ...]

After hours block pattern (significance of time)

Wed, 26 Jul 2006 04:08:34 +0000
Lets look at an example where you want to block international calls outside of business hours 8 am to 5 pm.
Remember the time you should configure is in 24 hours format. So 5 pm is 17:00.
after-hours block pattern 1 9011
after-hours day Sun 17:01 08:59
after-hours day Mon 17:00 08:59
after-hours day Tue 17:00 08:59
after-hours day Wed 17:00 08:59
after-hours ...]

CME-CUE on two different routers

Fri, 14 Jul 2006 01:01:35 +0000
If you need to integrate CME with a CUE on a different chassis, you would need the following.
1. Create a h323 dial-peer in CME gateway and point it to the gateway that hosts CUE.
2. Create a SIP dial-peer in the gateway that hosts CUE to point to CUE ip address.
You cannot create a SIP dial-peer ...]

Matching calling party with Attendant DN

Thu, 20 Jul 2006 01:20:43 +0000
If an Attendant DN is configured on FXO port and this parameter is set to True, then Callmanager will limit outbound calls from that DN to only use the FXO port that is configured with that Attendant DN. You would need to create a route pattern and include this FXO port in the route list. ...]

We worked hard to come upon this respectable composition on ccda. Don't let these efforts go to vain; use it wisely.



bgp ccie
bgp ccie
boot camp
boot camp
ipexpert ccie security lab audio