This web site is about boson ccie, cipt, cisco ccnp switching, cisco ccnp switching, ccie job.-All the current informaiton on boson ccie

Tuesday, January 13, 2009

cisco 2811 resources

Current cisco 2811 News

Dynamips for CCIE - Part 1 - What is Dynamips?

Mon, 05 Jan 2009 18:05:58 +0000
I’ve recently started using Dynamips for the vast majority of my CCIE lab study.  I had experimented with Dynamips in the past and found it very useful.  I really didn’t have a box capable of running Dynamips for full-scale labs vendor labs (IE in my case) so I used it primarily for short, “technology-focused” labs.  I recently upgraded ...]

MoH server using Trancoder

Sat, 12 Aug 2006 02:37:19 +0000
If the remote device does not support the codec of the MOH stream, then MOH server can trigger a transcoder. You would need to configure a MRGL with transcoder resource in the MoH servers device pool. In this case, CCM does not use the trancoder of the remote device. It will only use the transcoder ...]

Bloggers Unite For World AIDS Day Badges

Wed, 19 Nov 2008 21:10:19 +0000
The next Bloggers Unite event is happening December 1st, 2008. Bloggers Unite has teamed up with NIDA and Aids.gov to recognize World AIDS Day 2008. Grab a badge below to show your support and get the word out about Bloggers Unite.

<a href="http://unite.blogcatalog.com" title="Bloggers Unite - Blogging For Hope"><img src="http://assets.blogcatalog.com/unite/badges/081201/bu_aids_badge1.gif" alt="Bloggers Unite"></a>

<a href="http://unite.blogcatalog.com" title="Bloggers Unite - ...]

Books

Sat, 22 Nov 2008 09:09:00 +0000
Jared has written a very nice post over at the IPexpert Blog on a recommended book list for the CCIE

MGCP Template

Wed, 05 Jul 2006 21:05:17 +0000
mgcp
mgcp call-agent 10.1.1.1
mgcp ip qos dscp cs3 signaling
mgcp dtmf-relay voip codec all mode out-of-band
ccm-manager fallback-mgcp
ccm-manager redundant-host 10.100.1.50
ccm-manager mgcp
ccm-manager music-on-hold (if you need to stream moh locally from flash)
application
global
service alternate Default
dial-peer voice 10 pots
service mgcpapp
incoming called-number .
port 1/0:23
direct-inward-dial


BlogCatalog’s New Political Blogger Channel

Wed, 02 Jul 2008 23:11:36 +0000
Many BlogCatalog members have asked us for a place on BlogCatalog to talk politics and connect with with other bloggers over political discussions. Today, we are excited to announce the launch of the BlogCatalog Political Channel located at http://www.blogcatalog.com/politics. The BlogCatalog Political Channel is a place where bloggers can have their political ...]

MoH server using Trancoder

Sat, 12 Aug 2006 02:37:19 +0000
If the remote device does not support the codec of the MOH stream, then MOH server can trigger a transcoder. You would need to configure a MRGL with transcoder resource in the MoH servers device pool. In this case, CCM does not use the trancoder of the remote device. It will only use the transcoder ...]

Of all the articles that I have written, I consider this article of cisco 2811 to be my best article. Hope you feel the same too.
#



cisco 2811 Items For Viewing


Handango Inc.
Win 10K


ccie security practice labs
ccie security training
ccie self study
| |

Labels:

350 001 web sites

350 001 in the news

Service parameters to change on startup

Sun, 16 Jul 2006 18:16:36 +0000
1. BRQ - True
2. AAR - True
3. Call Diagnostics enabled - True

Marking traffic to and from CUE

Thu, 13 Jul 2006 04:14:16 +0000
How to mark traffic coming in and out of CUE ?
class-map match-all SipControl
 match protocol sip
!
policy-map SipMark
 class SipControl
  set ip dscp cs3
 class class-default
 interface Service-Engine0/0
 ip unnumbered FastEthernet0/0
 ip route-cache flow  ——————————This command was used solely for the purpose of Netflow. Nothing to do w/marking
 service-module ip address 10.1.11.5 255.255.255.0
 service-module ip default-gateway 10.1.11.4
 service-policy input SipMark ——————– This policy map marks packets from CUE ...]

NTP security as in RFC 958/1305

Fri, 19 Dec 2008 11:42:19 +0000
When devices should be synced, it’s time to configure ntp with sources, servers and clients/peers.
Every cisco router can act as the ntp master.
ntp master 1
is just everything you need to configure the router as an ntp source. The router will use 127.127.7.1 address as the local source for ntp updates. This is a reference clock ...]

We felt that 350 001 demanded more recognition than it is presently getting. So we had decided on writing on 350 001. Enjoy it.
#



350 001 Products we recommend


Kaplan Test Prep and Admissions (Kaptest.com)
Discover the new 2007 Office system


ccie security
ccie security boot camp
| |

Labels: