Document about ccie lab blueprint

Headlines on ccie lab blueprint

New CCIE R&S Vol 2 Ver 5 Labs Posted over at Internetwork Expert

Tue, 16 Dec 2008 14:58:08 +0000
Internetwork Expert has the new Volume 2 labs 1 and 10 up right now.
Labs 1 and 10 of the new CCIE Routing & Switching Lab Workbook Volume 2 Version 5 (IEWB-RS) are now available on the members site.  All users with an active subscription to version 4.1 should automatically see the R&S Lab Workbook Volume ...]

Voice BLS Volume I - Initial Session

Sat, 01 Nov 2008 17:10:12 +0000
Today I had a Proctor Labs session, which I wanted to use to get a feel of the environment. I have an 877W router at home, so opted to use the hardware EZVPN option to connect to the rack. The EZVPN config was fairly straight forward to get going, and it worked first time - ...]

How to setup CCM to accept calls from H323 gateways that are not defined locally?

Thu, 03 Aug 2006 00:42:00 +0000
Change the service parameter “Accept Unknown TCP Connection” to True
Default is False

MGCP Template

Wed, 05 Jul 2006 21:05:17 +0000
mgcp
mgcp call-agent 10.1.1.1
mgcp ip qos dscp cs3 signaling
mgcp dtmf-relay voip codec all mode out-of-band
ccm-manager fallback-mgcp
ccm-manager redundant-host 10.100.1.50
ccm-manager mgcp
ccm-manager music-on-hold (if you need to stream moh locally from flash)
application
global
service alternate Default
dial-peer voice 10 pots
service mgcpapp
incoming called-number .
port 1/0:23
direct-inward-dial

With MPLS the VPN allow the Peer to Peer bad model to have advantage over the Overlay model where in the MPLS we use VRF
Virtual Routing Forwarding separators between each network and the configuration is done only on each new site.
meaning that if I am an SP and I have 3 client (Cisco, Microsoft, Verizon) each vrf will have a unique color vrf Cisco, vrf Microsoft and
vrf Verizon, and to join a new branch is only to color this branch traffic accordingly, so the main work is done in the initial design and
implementation and any new addition is actually very simple to add.


Unity - Tips

Wed, 02 Aug 2006 06:58:37 +0000
The following tip may be utilized when you are asked to forward a call from CM / CME to Voicemail and have the caller leave a message. Then the message should be delivered to multiple user inboxes and also  light up mwi on the appropriate phones.
a. Setup CM/CME to forward calls to VM. (say  a ...]

Featured ccie lab blueprint Items



Catch a great rate from Enterprise for your trip


bgp ccie
cisco 642 811 | cisco 642 821 | cisco 642 831 | cisco 642 891